780.955.2202[email protected]

Thermal Set Elastomers

Get Maximum corrosion and wear control

Our Thermal Set Elastomer Product Line

FLEXIBLE, RESILIENT AND VERSATILE

Our Thermal Set Elastomer protective coatings, linings, joint fillers and repair materials can be applied to a wide variety of industrial, civil, and commercial environments.

100% SOLIDS

Our Thermal Set Elastomer solutions are 100% solids, which means they don’t contain any VOCs, making them high performance, eco-friendly, non-toxic and low risk for application.

RAPID GEL, TACK AND CURE TIMES

Unique chemical characteristics result in rapid gel, tack and cure times often less than 20 seconds – making quicker return to service and reducing downtime significantly.

CUSTOMIZABLE FORMULATIONS

We offer customizable formulations for almost any application, with attainable physical properties including high elongation, abrasive resistance, superior tensile strength, and hard or soft characteristics.

Benefits of Thermal Set Elastomer

  • WORLD CLASS PROTECTION FOR CONCRETE & STEEL
  • ABRASION & EROSION RESISTANCE
  • CORROSION PROTECTION
  • HYDROPHOBIC
  • UV & COLOUR STABLE
  • NON-TOXIC
  • FOOD SAFE
  • ECO-FRIENDLY
  • UV & COLOUR STABLE
  • PRIMARY & SECONDARY CONTAINMENT
  • TANK, WATER STORAGE AND AQUIFER LININGS
  • HAZARDOUS MATERIALS CONTAINMENT
  • ROOF & FLOOR PROTECTIVE COATINGS
  • STRUCTURAL REINFORCEMENT

Compare our Thermal Set Elastomer products

FSS 50 DM Properties

   
% Solids 100
Shore D Hardness 15 - 25
Tensile Strength, psi 2000 - 2800
Tensile Elongation, % 260 - 360
Modulus of Elasticity, kpsi 0.8 - 1.5
Tear Strength, pli 300 - 450
Taber Abrasion, mg wt loss 1501 - 2501
Application Temp, °F -40° - 300°
Service Temp, °F -40° - 350° (Dry)
Gel Time 3 - 7 seconds
Tack Free 8 - 12 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

Ultravers 320 Properties

   
% Solids 100
Shore D Hardness 50 - 55
Tensile Strength, psi 2500 - 2800
Tensile Elongation, % 250 - 350
Modulus of Elasticity, kpsi 0.8 - 1.5
Tear Strength, pli 450
Taber Abrasion, mg wt loss 1251
Moisture Vapor Transmission, perms .02
Application Temp, °F -40° - 350°
Gel Time 5 - 10 seconds
Tack Free 15 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

FSS 45 DC Properties

   
% Solids 100
Shore D Hardness 45
Tensile Strength, psi 1800 - 2400
Tensile Elongation, % 450 - 520
Modulus of Elasticity, kpsi 0.96 - 1.45
Tear Strength, pli 430
Taber Abrasion, mg wt loss 1501 - 2501
Moisture Vapor Transmission, perms .025
Application Temp, °F -40° - 300°
Service Temp, °F -40° - 350° (Dry)
Gel Time 15 – 30 seconds
Tack Free 75 -105 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

VF 380 Properties

   
% Solids 100
Shore D Hardness 80 - 85
Tensile Strength, psi 900 - 1900
Tensile Elongation, % 350 - 390
Modulus of Elasticity, kpsi 0.5 - 1.9
Tear Strength, pli 300 - 450
Moisture Vapor Transmission, perms 0.02
Taber Abrasion, mg wt loss 8* - 18*
Application Temp, °F -40° - 350° (dry)
Gel Time 10 - 18 seconds
Tack Free 160 - 180 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

VF 330 Properties

   
% Solids 100
Shore D Hardness 50
Tensile Strength, psi 2500 - 3000
Tensile Elongation, % 400 - 500
Tear Strength, pli 400 - 500
Taber Abrasion, mg wt loss 801 - 1001
Service Temp, °F -40° - 300° (Dry)
Gel Time 6 - 10 seconds
Tack Free 12 - 15 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

LC 25 Properties

   
% Solids 25
Shore D Hardness 45
Tensile Strength, psi 1800
Tensile Elongation, % 500
Taber Abrasion, mg wt loss .011†
Moisture Vapor Transmission, perms 0.0042
Bond Strength, psi > 200
Viscosity, cps < 700
Color Black
Service Temp, °F -40° - 400°
Working Time 30 - 45 minutes
Full Cure, Open to Use 7 days

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

VT 40 Properties

   
% Solids 40
Shore D Hardness 15 - 25
Tensile Strength, psi 600 - 900
Tensile Elongation, % 235 - 290
Modulus of Elasticity, kpsi 0.765 - 1.18
Tear Strength, pli 70 - 125
Taber Abrasion, mg wt loss .002†
Moisture Vapor Transmission, perms 0.0017
Bond Strength, psi > 200
Viscosity, cps < 7000
Color Grey
Service Temp, °F -40° - 400°
Working Time 30 - 45 minutes
Full Cure, Open to Use 7 days

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22